MANOLI spray gun improves work efficiency while saving solvents and materials

Author : MANOLI Time : 2021-04-20 11:51:16

Volvo (Korea) used a single-component high-pressure airless pump equipped with an airless air assist (AA) spray gun to spray primer and topcoat on the frame of the excavator. Six units were installed. After the spraying every day, the operator needs to flush all the pumps, wasting a lot of mixed materials and solvents. Operators often have to manually mix materials during work, up to four or five times a day. The company needs to improve this working environment.
challenge:
How to improve work efficiency while saving solvents and materials?

solution
The new batching technology of MANOLI spray gun can realize the accurate proportioning according to the proportion, so as to increase the output and reduce the waste. In addition, the maximum flow rate of each XM50 is 3 gpm, which can support simultaneous operation of multiple spray guns. Advanced and intuitive user control displays the spray ratio in real time, and the USB port allows users to easily access and download historical spray data. In summary, MANOLI spray gun simplifies the work of the operator and improves work efficiency.
MANOLI spray guns conducted XM field tests with end users, which impressed the operators. The trial report and material cost saving report collected on site have satisfied the management of the end user. It is estimated that the payback period of the equipment will be within 18 months.

Results
After using the MANOLI spray gun, Volvo (Korea) was able to avoid the trouble of manual material mixing and daily equipment flushing, which not only improved the manufacturing process, but also increased productivity. In addition, the equipment also provides precise proportioning control that meets the requirements of end users. Due to the outstanding performance of the product, the user purchased two more Graco XM50 spraying machines after the first order.

Return